Lab Gruppen

FP 6000Q

Descrição

A plataforma tecnologica desta nova série, combina um refinamento da amplificação patenteada Class TD com o Regulated Switch Mode Power Suply, devolvendo ao utilizador a potência e a densidade desejada.
A FP Plus Series encerra num espaço diminuto de 2U, uma potência que pode chegar aos 13.000 watt. Mas como de nada serve a potência sem controle, esta série está preparada para ser controlada e gerida em rede, com o já conhecido sistema Nomad Link.

• A FP 6000Q possuí 4 canais de 1500W, totalizando 6.000W.

 

Peak total output all channels driven 6000W
Peak output voltage per channel 101V
Max output current per channel 27A
Max Output Power
16 ohms per ch. (all ch.’s driven) 320W
8 ohms per ch. (all ch.’s driven) 625W
4 ohms per ch. (all ch.’s driven) 1250W
2 ohms per ch. (all ch.’s driven) 1500W
16 ohms Bridged 1250W
8 ohms Bridged 2500W
4 ohms Bridged 3000W
2 ohms Bridged 3)
Performance with Gain 35 dB & VPL: 101V
THD 20 Hz – 20 kHz for 1 W 0.1%
THD at 1 kHz and 1 dB below clipping 0.05%
Signal To Noise Ratio 122 dBA
Channel separation (Crosstalk) at 1 kHz 70 dB
Frequency response (1 W into 8 Ohm) +0/-3 dB 6.8 Hz – 34 kHz
Voltage Peak Limiter (VPL), max. peak output
VPL, selectable per ch. (V) 101, 83, 70, 56, 47, 38V
VPL, selectable when bridged (V) 202, 166, 140, 112, 94, 76V
Voltage Peak Limiter mode (per ch.) Hard / Soft
Gain and Level
Amplifier gain selectable (all channels) 1)
– Rear-panel switches
23, 26, 29, 32, 35, 38, 41, 44 dB
Default gain 38 dB 38 dB 35 dB 35 dB
Level adjustment (per ch.) Front-panel potentiometer, 21 position detented from -inf to 0 dB
Connectors and switches
Input connectors (per ch.) 3-pin XLR, electronically balanced
Output connectors (per ch.) Neutrik Speakon or Binding Posts (must be specified upon order). BP only on FP 13000
Output bridge mode per two ch.’s A+B – Ch. A is signal input source. A+B, C+D – Ch.’s A and C are input source
NomadLink® network 2 x RJ45 EtherCon connectors, IN and OUT
Intelligent fans (on/off) Yes, depending on presence of output signal
Power on/off and Remote enable on/off Individual switches on front-panel
Cooling Two fans, front-to-rear airflow, temperature controlled speed
Front-panel indicators
Common NomadLink® Network; Power Average Limiter (PAL) 2); Power on
Per channel Signal present / High impedance; -20 dB, -15 dB, -10 dB and -4 dB output
signal; Voltage Peak Limiter (VPL); Current Peak Limiter (CPL):
Very High Frequency (VHF); High temperature; Fault; Mute
Power
Operating voltage, 230 V / 115 V nominal 4) 130-265 V / 65-135 V
Mínimo power-up voltage, 230 V / 115 V 171 V / 85 V
Power Average Limiter (PAL) 2) Yes
Soft start / Inrush Current Draw Yes / max. 5 A
Mains plug type 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock
Dimensões: (W/H/D) W: 483 mm (19”), H: 88 mm (2 U), Overall D: 396 mm (15.6”), Mounting D: 358 mm (14.1”)